Formfutura MagicFil Thermo PLA - Grey 500g 1,75mm

37,15 € HTVA
/ 44,95 € TTC

MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29° C. MagicFil’s anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29° C or above.

Quantité
Plus que 16 pièce(s) en stock

  • Paiement sécurisé Paiement sécurisé
  • Livraison rapide et sécurisée Livraison rapide et sécurisée
  • Satisfait ou remboursé Satisfait ou remboursé
  • Facturation TVA 0% en intracommunautaire pour les professionnels hors Belgique Facturation TVA 0% en intracommunautaire pour les professionnels hors Belgique
MagicFil Thermo PLA is based on our EasyFil PLA compound, but with a touch of thermochromic magic added, as MagicFil has a colour changing ability when heated above 29° C. MagicFil’s anthracite grey colour will change into a natural PLA colour when the material reaches a temperature of 29° C or above.
Being based on our EasyFil PLA compound make MagicFil Thermo PLA a high-end “easy to use” impact modified PLA (Poly-Lactic Acid) type of 3D printer filament which is optimized for FFF / FDM 3D printing technology. MagicFil Thermo PLA is tougher and less rigid than standard PLA and its improved filament flowing behaviour and interlayer adhesion make it an extremely easy to print filament.

Unique features

  • Colour changing ability from anthracite grey to natural PLA at 29° C

    • Anthracite grey colour < 29° C > natural PLA colour

  • Very easy to print

    • Warp-free printing and no deformation after cooling

    • Improved flowing behaviour and inter-layer adhesion

    • Good first layer adhesion to several (un)heated print surfaces

  • Slightly softer than standard PLA resulting in improved strength and impact resistance

  • Almost odourless processing/printing

  • Biodegradable

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
Print temp: ± 200 - 230° C Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 0 - 60° C Fan speed: 50-100% Experience level: Beginner




ff_magic

Fiche technique

Poids
500 g
Diamètre filament
1,75mm
Matière
PLA

Références spécifiques