Zortrax Z-HIPS Grey 1,75mm 800g
Le filament Z-HIPS est le meilleur pour l'impression 3D de grands modèles. Sa durabilité le rend parfait pour les machines de prototypage et les tests fonctionnels. Par rapport au polystyrène à fort impact standard, le Z-HIPS a été modifié pour offrir à vos impressions 3D une finition semi-mate unique. La qualité de surface du matériau est comparable à celle des articles fabriqués en série. Avec Z-HIPS, vous pouvez rapidement prototyper des boîtiers et des pièces industrielles sans post-traitement nécessaire. Ce matériau à faible retrait vous permet d'effectuer efficacement des tests de performances fiables sur des modèles ressemblant étroitement aux produits finaux.
Zortrax Z-HIPS Grey 1,75mm 800g
General printing guidelines *
| Nozzle size: ≥ 0.15mm | Layer height: ≥ 0.1mm | Flow rate: ± 104% |
| Print temp: ± 220 - 270° C | Print speed: Medium | Retraction: Yes ± 5mm |
| Heat bed: ± 90 - 110° C | Fan speed: 0-30% | Experience level: Intermediate |
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
Filament length
| ρ: 1.03 g/cc | 50 gr coil | 1 Kg spool | 2.3 Kg spool | ||
| Ø 1.75mm | ± 20.2m | ± 404m | ± 928m | ||
| Ø 2.85mm | ± 7.6m | ± 152m | ± 350m |
Product export information
| HS Code: 39169090 | Description: Monofilament | Country of origin: the Netherlands |
Compliance *
This filament is compliant to below listed directives and regulations.
-
RoHS directive 2011/65/EC
-
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.