Ultrafuse PET CF15

Ultrafuse PET CF15 is an engineering filament optimized to enable users to develop new 3D printing applications with higher requirements. With its superior heat resistance, high strength and rigidity, this is a filament for a wide range of demanding industrial applications. Its high dimensional stability and very low moisture uptake makes it a perfect solution for applications in humid operating environments.

Tips & Tricks

• Print Temp: 245-265°C
• Print Speed: 40-80mm/s
• Glass Bed Temp: 70-80°C
• Layer Height: 0,2mm
• Extrusionwidth: 0,6mm
• Infill Density: 20%
• Fan Speed: 0%
• Top/ Bottom Thickness: 1,0-1,2mm

Material Properties

• Tensile Strength (MPa): 12.5 (ZX), 63.2 (XY)
• Flexural Modulus (MPa): 2253 (ZX), 6293 (XZ), 5452 (XY)
• Elongation at Break: 0.5 % (ZX), 3.7 % (XY)
• Impact Strength Izod notched (kJ/m2): 2.0 (XZ), 5.0 (XZ) 5.7 (XY)
• Impact Strength Izod unnotched (kJ/m2): 2.4 (ZX), 22.6 (XZ), 25.1 (XY)
• HDT at 0.45 MPa: 108 oC

BASF Quality Control

The best raw materials available is selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches. It will perform as expected every time.

All BASF products are 100% traceable to the source.