With EasyPrint Matt PLA your prints will look more beautiful than ever!

EasyPrint Matt PLA is our latest PLA and is made from 100% virgin PLA pellets. Matt PLA is one of the most versatile and easy to use filaments on the market. With the right settings you can print parts that is very strong, and it also have a nice matt surface and a slight rough surface which gives it a very natural look. Matt PLA has a rough surface which gives it a more natural look when printed. It also has the benefit of higher prints speeds than regular PLA. This version of PLA is perfect when you don´t want shiny prints but rather have the matt surface without any reflections. It´s perfect for architects and model makers that don´t want that plastic feeling. Thanks to the very low shrinkage EasyPrint Matt PLA is very easy to use in all FDM/FFF printers. The risk of warping is very small with EasyPrint Matt PLA and it works well without a heated build plate, but for larger prints and the absolute best results we recommend a heated build plate. A temperature setting of 40-60°C, will make the prints stick even better.

Wide Temperature span

Thanks to the high quality and lack of additives you can print this filament in a wide temperature range. Recommended temperature is 205° 220°

Perfect diameter tolerance

EasyPrint is made to be one of the best on the filament market. With a diameter tolerance of +/-0.05 mm and continuous roundness.

Continuously monitored

During the manufacturing process laser is being used to measure the filament to ensure that we live up to our promise for a tolerance of +/-0.05 mm

Non-toxic and biodegradable

EasyPrint is made from 100% pure virgin PLA pellets. Thanks to the pure material EasyPrint meets the demand of a modern environmentally safe PLA and is REACH and RoHS compliant. There are no harmful additives in EasyPrint, so you don´t have to worry about any toxic fumes.

Ease of use

EasyPrint sticks on BuildTak, PEI or glass plate coated with adhesive spray or PrimaFIX. There´s no need for a heated plate but if you have it, we recommend a setting of 40°- 60° for best results.