w3c

w3c

BASF Ultrafuse PET

€152.46

€126.00 tax excl.

BASF Ultrafuse PET

€152.46

€126.00 tax excl.

w3c

Quantity :

  Local service

Personalised service in French

  Delivery policy

Fast delivery in Belgium and France

  Support technique

Support technique et garantie directement chez Slice3D

Ultrafuse PET

Ultrafuse PET is made from a premium, food approved PET (Polyethylene terephthalate). PET is widely used to produce food and beverage containers and bottles.This high-quality filament will give you outstanding printing results: good layer adhesion, high resolution and easy to handle.

Ultrafuse PET is as easy as PLA, but is much stronger. The filament has a large operating window for printing (temperature vs. speed), so it can be used on every 3D-printer. Ultrafuse PET can be 100% recycled, is watertight and has great colors and finish.

Tips & Tricks

  • Temperature: 210 degrees
  • Heated Bed: 75 degrees
  • Speed: between 30 and 70mm

Material Properties

  • Tensile Strength (MPa): 17.2 (ZX), 33.4 (XY)
  • Flexural Modulus (MPa): 1826 (ZX), 1840 (XZ), 2063 (XY)
  • Elongation at Break: 1.1 % (ZX), 2.7 % (XY)
  • Impact Strength Izod notched (kJ/m2): 1.8 (ZX), 1.9 (XZ), 2.1 (XY)
  • Impact Strength Izod unnotched (kJ/m2): 4.1 (ZX), 7.7 (XZ), 12.3 (XY)
  • HDT @ 0.45 MPa: 63 oC

10428_Filament_BASF__002.jpg

Boxed:

Sticky Add To Cart

Font: